Your vehicle is built from over 15 different high strength metals, and each type of steel has rules for how it can be heated, cut, hammered, or even if it can be welded or hammer and dollied at all
Tag: auto body repair
Why You Need to Know About GM’s Very Specific ADAS Calibrations
Your GM vehicle is built with highly “Advanced Driver Assistance Systems’ Or ADAS for short. This includes the cameras and proximity sensors that operate everything from the backup camera, the parking assist, the steering, the brakes, the blind-spot monitors, and more.
What is a post-repair inspection, and why would I want one after my Sewell, NJ collision repair?
Did you recently get your car repaired by an auto body shop, and something just doesn't seem right? Or perhaps there have been issues with your repair shop throughout the entire repair experience, and you don't feel good about the repairs. Post repair inspections are a second opinion from a...
What Honda Wants Sewell Drivers To Know About Repairing The 2017 Odyssey
Here at Autotech Collision Service, we know quality repair starts with putting the customer as the priority. This is why we have dedicated ourselves to becoming experts in all things regarding Honda repair and are proud to call ourselves a Honda Certified OEM Shop, located right here in Sewell New...
Why Safety Inspections Must Be Performed Following Your New Jersey Subaru Collision Repair
This past November, Subaru wholesale parts specialist Nicole Reidel confirmed, “ALL repairs must undergo the Post Repair Safety Inspection, regardless of severity.”
Does Your New Jersey Body Shop Know Where The OEM Welds Go?
Not all New Jersey auto body shops know how to weld correctly. As a result, your safety could be at risk. We're here to tell New Jersey drivers the importance of a shop knowing where the OEM welds go and what this means for your safety.
What Honda/Acura Wants New Jersey Drivers To Know About Pre-and Post-Repair Scanning
Here at Autotech Collision Service, we are always informed so that we know how to better serve our customers here in New Jersey. Scanning affects every customer, which is why we want you to know what certain manufacturers have to say about it (such as Honda/Acura).
OEM Certification: The New Normal For Collision Repair
We're here to let New Jersey drivers know what a shop means when they say they're OEM Certified and just how important it is when getting your car repaired.
What Does R&R and R&I Mean On My New Jersey Repair Estimate?
Occasionally, you’ll receive an initial estimate from your insurance company. Sure, the repair process will begin with this initial estimate. However, it is not complete or the final cost of the repair. There will most likely be additional hidden damage that will require a supplement and could possibly total the...
How Long Will I Need A Rental While My Car Is Being Repaired?
We at Autotech Collision Service know how frustrating it is for you to be without your car. You go into the body shop thinking it only be a few days and before you know it, it's over a week. That's why we want to take the stress away from you....